Строительное оборудование GOMACO COMMANDER III

GOMACO Commander III;

4-rail finisher with 3100 section of 3100, open front mold, with screw, PTA and handlebar

Pavement width from 2 to 6m

First use: 2002

ENGINE (emission controlled)

Type: John Deere diesel turbocharger.

Power: 200 hp (147.1 kW) 2100 rpm.

SERVICE CAPABILITIES

Fuel tank: 55 gal. (208.2 L), locking cap.

Hydraulic oil tank: 170 gal. (643.5 L)

AUTOMATIC CONTROL SYSTEM

Type: Electronic-over-hydraulic.

Controls: The GOMACO control system has self-diagnosis for level, direction, inclined controls, paving accuracy and ease of operation.

Control indicators: Panel-mounted automatic control indicators allow the operator to monitor control signals as the machine follows the line of the line.

Reverse automatic control: the single switch sets control the automatic control with the machine moving in the opposite direction.

Slope transition system: Slope transition software is available and offers automatic level correction, automatic direction correction and eliminates the need to adjust the line.

HYDRAULIC SYSTEM

Pumps: Two main two-stage pumps deliver 95 gpm (359.6 Lpm) 2100 rpm. A pressure compensated lift control pump provides 11.5 gpm (43.5 Lpm) 2100 rpm.

Hydraulic oil cooling: chiller and oil tank with forced air, with additional capacity, designed with an internal confusion for atmospheric cooling.

Filtration: Industrial standard filtration, including 10 micron control circuit filter, 100 wire mesh control circuit filters and reusable magnetic double strainers.

SHAKER

Type: Hydraulically powered, head motor, variable speed, independently controlled.

Quantity: 16 hydraulic circuits

WATER SYSTEM

Type: pressurized water system.